& ENDWALL FLASHING
Butt the side edge of panel
against the wall and install flashing to cover the rib. Flashing
goes underneath siding on wall. Note: If a rib does not match
up with your wall, bend the panel up and tack to the wall, then
Please note: For Endwall Flashing
applications, we will need the pitch of the roof in order to
Install roofing panels. If your pitch is shallow, you may want
to bend up the pan, creating a dam. You may also install matching
closure. Notch-out the return and install flashing over the roof
panels. use bugle-head screws through the upper leg of the fastening
wall. Cover the screws with wall siding.
NOTE: We can fabricate a custom
piece of this trim in a ventilated format for an additional charge.